Roof Square Calculator
Footprint, pitch and complexity give the roof area, the squares to order and the bundles of shingles to ask about.

Not sure of the pitch? Use the Pitch Finder on the home page, or hold a level against a rafter in the attic and measure the rise over 12 inches.
- Roof area, about
- 0
- Waste allowance
- 0%
- Bundles of shingles
- 0
- Underlayment rolls
- 0
A pitch of 7:12 or more is steep. Crews need extra safety gear, so labor usually costs more.
A planning figure from rules of thumb, not a measured takeoff. A roofer who measures your roof will give exact quantities. One square covers 100 square feet of roof.
From footprint to squares
Roofers measure in squares: one square is 100 square feet of roof. To estimate it, start with the footprint of the house, which is the outline of the ground floor. A sloped roof is bigger than its footprint, and the steeper the pitch the bigger it gets. The tool multiplies by a pitch factor, adds about five percent for the overhangs and then a waste allowance for cuts, valleys and ridges.
This is a planning figure, not a measured takeoff. A roofer who measures your roof, or uses aerial measurements, will give exact quantities. Most asphalt shingles come three bundles to a square, and a typical roll of synthetic underlayment covers about ten squares.
Ask for a measured quote
Ask each company how it measures the roof, and compare written estimates.